Drum Heater for Poly 55 Gallon Drums

$429.99
Write a Review
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

ELECTRIC DRUM HEATER With Pre-Set Thermostat - For 55 Gallon Poly / Plastic Drums

Drum Heater 

The model LIM-55 heater is an excelent choice for warming and heating poly / plastic drums. Since it has a built in  pre-set factory non-adjustable thermostat, and is designed for heating materials in 55 gallon high density polyethylene drums it makes it easier and safer to warm a poly / plastic drum  The thermostat is factory set and will not exceed the maximum plastic-safe temperature of 165° F that is recommended by many manufacturers of the poly / plastic drums.

This non insulated heater is constructed of rugged aluminized steel. The heater is installed easily. Just wrap it or set it around the drum and set the  spring-loaded toggle clamps, and then turn on the unit. Units are equipped with on-off power control, neon pilot light and a 6 foot power cord with a standard three-prong plug.

SPECS:

Preset Temperature

Fits Drums

Temp. Range Low- 0 High165

Volts120V   Watts800W

Length 22 1/2 "     Height 9  "

CSA Certified, UL Listed

Warranted for one year.

WARNINGS

Only for indoor use. Units are not moisture-proof nor explosion-proof. Not for use with flammables or near a flammable area.

Caution: Do not warm or heat drums unattended and without monitoring. Do not allow liquid in a container to fall below the level of the heater will render the heater ineffective and could irreparably damage the plastic drum and potentially cause injury or damage or be a fire hazard. 

Electric drum heaters should only be used to warm or to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a NON-HAZARDOUS area.

Read all directions and insturctions thoroughly before using. 

Consult an electrician to make sure your connections and outlets are safe and suitable for this product before use.